FARM & SPECIAL TRACTOR RULES
FARM TRACTORS SPECIAL TRACTORS
7000 NON TURBO 18.4/38 7500 Special
8500 Turbo 18.4/38 2” inlet turbo 18.4/38
14,000 Turbo 20.8/38 9500 Special
2.8” inlet turbo 20.8/38
12,500 special
2.8" inlet turbo 20.8/42
3000 RPM Limit 1. No p-pumps
5mph pace 2. 3000 RPM Max.
WORKING PTO REQUIRED 3. Engine side shields recommended
4. Working air shutoff
5. Factory fueled
6. Deadmans throttle
Must spring back to idle
7. Wheelie bars
8. Bell housing blanket REQUIRED for 2011
9. Exhaust pipes must be straight up
No curved pipes or rain caps.
Two 3/8” cross bolts required in exhaust
General Tractor Rules:
1. All tractors must cross the scale on the way to line up for their hook.
2. Drivers will draw for pull position in each class upon entry.
3. Judges decisions are final! ANY ARGUING WILL RESULT IN DISQUALIFICATION!
4. Front weights will be a maximum of 24” ahead of the forward most point of the frame.
Rear weights must not interfere with hook point. All weights must be secured to tractor.
5. 20” Max. drawbar height 18” minimum from the center of the rear axle to the hook point
No third arm links t the drawbar. Minimum 3” hole no more than 1.5” from back edge of the drawbar or
Twisted clevis must be present on the tractor.
6. Tractors must have all hoods, fan shrouds and fenders.
7. Tractor must remain inbounds or will be disqualified.
8. Tractors will be operated in a safe manner on and off the track.
Driver must remain seated during the entire duration of their pull.
9. Absolutely no cut tires of any kind.
10. Shifting w/ power shift transmission or torque amplifier will be allowed as long as forward progress
continues.
11.No tractors registered for the Special Class (12,500, 9,500, 7,500) can pull in the Farm Class.
